Grigsby 180 Schematic purchase

Schematics
Search
Valve
Data
Transistor
Data
Contact
Information
Free
Radio Books
Privacy
Policy

Trustpilot
5 Star Trust Pilot

Supporting the Right to Repair!
Schematics sent by Email £1.80 (~ $2.20 or €2.10)

Saturday 20/4/2024 8:18
I am away until Thursday evening 21/12/2023 I cannot send any schematics marked TO SCAN until home, pre-scanned ones will be sent probably in the evening UK time
Grigsby 180 (Gernsback : Radio 1 P: 193)
£1.80 (~ $2.20 or €2.10)
Not the correct model? go back to the search page to change

The schematic will be taken from Gernsback-Manual-1936

Gernsback-Manual-1936 preview

Grigsby 180 Specification spec data sheet

These notes are automatically scraped from Google, Bing, Yahoo, Yandex
by an Artificially (not so) Intelligent algorithm
CountryUSA
ManufacturerGrigsby-Grunow (-Hinds) Co. (Majestic pre 1933); Chicago (IL)
ModelMajestic Chassis 180 - Grigsby-Grunow -Hinds Co.
Year: 1930Broadcast Receiver
Valves9: 27 27 27 27 27 50 50 81 81
TechnologyTRF without regeneration; 3 AF stages; Neutrodyne
Tuned Circuits4 AM circuits
Wave BandsBroadcast only (MW).
Power Type90-130 Volts AC
NotesPush-pull af output stage; using the 8P6 or 8P3 power unit; chassis for Majestic model 181.
This radio is a cascade of 3 individual TRF stages, each with its own feedback coil forming a Wheatstone bridge
acting as a Hazeltine neutralization for the triode (described as the RFL circuit in contemporary sources).
The feedback polarity is reversed with respect to the signal polarity through the Cag Miller-capacitance,
in effect neutralising the triode tendency to oscillate.
The antenna circuit has a separate tuning coil, to be readjusted with each tuned frequency.
The tuning scale is graduated with 2 scales: One in frequency from 550 to 1500 kHz and the other as a linear scale from 0 to 100.
LF coupling between stages is done by transformers - Push-pull output.
The unit contains a separate 8P6 or 8P3 power supply unit with individual transformers for the filaments and the 425 Volt anode supply.
A current regulator is included in the primary circuit of the power transformers to compensate for mains voltage changes between
90 and 130 Volt AC.
SourceMyFile: Majestic_Grigsby-60_70_72_70B_80_90_90B_100_100B_130A_Super Screen Grid_180_181_230A_Majestic_7BP3_7BP6_7P3_7P6_8P3_8P6_9P3-1930.Gernsback.Radio.pdf
SourceBook: Gernsback Vol: 1 Page: 193
SourceMyFile: Majestic_Grigsby-20_21_22_23_30_31_50_52_60_61_62_70_71_72_70B_80_90_90B_100_100B_130A_160_163_Super Screen Grid_180_181_230A_Majestic_7BP3_7BP6_7P3_7P6_8P3_8P6_9P3-1933.Rider.Radio.pdf
SourceBook: Rider Vol: 1 Page: 8
SourceBook: Rider Vol: 2 Page: 2